00-010-62681358
Room 614, Building 4, No. A69, Fushi Road, Haidian District, Beijing, China (Mainland)
Feature:
1.Color LCD monitor & 256 magnification
2.Compact & Light weight
3.Reversible monitor with control panel on each side
4.Max. wind velocity of 15m/s.
5.8 Sec. splice time, 40 Sec. tube-heat time
6.Simultaneous X and Y views
7.Large capacity internal battery
8.SYSTEM TEST ensures the best working condition
9.User programmable
10.Auto check fiber end face
11.Auto calibrate parameters
12.Auto calibrate parameters
13.Multiple language options
Specification:
PARAMETER | VALUE |
Model | FSM-80S Fusion Splicer |
Applicable Fibers | Single-mode (G.652 & G.657), Multimode (G.651), DS (G.653), NZDS (G.655) |
Fiber Count | Single, 2, 4, 5, 6, 8, 10, 12 |
Cladding Diameter | 125 μm |
Coating Diameter | Ribbon: 0.25 mm to 0.4 mm, Single: 250 μm and 900 μm |
Fiber Cleave Length | 10 mm |
Typical Average Splice Loss | 0.05 dB with SM, 0.02 dB with MM, 0.08 dB with DS, 0.08 dB with NZDS;measured by cut-back method relevant to ITU-T standards |
Splicing Time | Typical 15 seconds with standard single-mode fiber |
Arc Calibration Method | Automatic, real-time by using results of previous splice when in AUTO mode; manual arc calibration function available |
Splicing Modes | 100 preset and user programmable modes |
Splice Loss Estimate | Based upon dual camera cladding alignment data |
Storage of Splice Result | Last 2000 splice results stored in the internal memory |
Fiber Display | X or Y, or both X and Y simultaneously; front or rear monitor display options with automatic image orientation |
Magnification | 35X to 90X |
Viewing Method | Dual cameras with 4.7 inch TFT color LCD monitor with anti-reflective coating |
Operating Condition | 0 to 3,660 m above sea level, 0 to 95% RH, and -10 to 50C respectively |
Mechanical Proof Test | 1.96 to 2.25 N |
Tube Heater | Built-in tube heater with 30 heating modes; auto-start function |
Tube Heating Time | Typical 40 seconds with FP-5 sleeve, 17 seconds with FP3 (40), 5-15 seconds with micro sleeves |
Protection Sleeve Length | 60 mm, 40 mm, Micro |
Splice/Heat Cycles with Battery | Typical 110 cycles with power save functions activated |
Electrode Life | 1,500 Arc Discharges |
Power Supply | Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-18, 14.8V DC with BTR-09 battery |
Terminals | USB 2.0 (USB-B type) for PC communication and Mini-DIN (6-pin) for HJS-02/03 |
Wind Protection | Maximum wind velocity of 15m/s (34 mph) |
Dimensions | 146 W x 159 D x 150 H (mm) / 5.7 W x 6.3 D x 5.9 H (inches) |
Weight | 2.3 kg (5.1 lbs) with AC adapter; 2.5 kg (5.5 lbs) with battery |
